All Products (12)

The Rebonding treatment is the first step to achieve your luxurious locks. Our advanced formula prepares hair for the keratin treatment by carefully opening the individual cuticles on each strand of hair. Deeply cleanses and rejuvenates, leaving your hair healthy and smooth. Removes build up of any excess oils. Straightens and eliminates frizz and split ends.

The Rebonding shampoo is the first step to achieve your luxurious locks. Our advanced formula prepares hair for the keratin treatment by carefully opening the individual cuticles on each strand of hair. Deeply cleanses and rejuvenates, leaving your hair healthy and smooth. Removes build up of any excess oils. Straightens and eliminates frizz and split ends.

Promotes deep removal of residue, preparing hair for full action of volume reducer. A conditioning treatment that is highly hydrating, leaving your hair soft and shiny. Straightens and eliminates frizz, smoothening out any stubborn or split ends.

Use the Reactive pro shampoo as the first step to begin your transformation to strong and heathy hair. This high-tech formula prepares your hair for the collagen busting treatment by carefully opening the individual cuticles on each strand of hair. Rebuilds damaged areas, increasing shine and frizz. Promotes the deep removal of residues, preparing the hair for the full action of the volume reducer.

What it does S.P.R. Full Protocol bundles the four steps of the S.P.R. (Sensorial Porosity Reconstruction) service into a single kit: S.P.R. Shampoo (Step 0), Protein Infusion (Step 1), Seal & Protect (Step 2) and Acidic Closure (Step 3). Together they clean, infuse botanical peptides into the cortex, lock the peptides in place and close the cuticle at pH 3.5, in one appointment of roughly 30 minutes' chair time. How to use it Step 0: apply S.P.R. Shampoo to wet hair and scalp, massage 2 to 3 minutes, rinse. Step 1: apply Protein Infusion to mid-lengths and ends, leave 10 minutes (heat optional), do not rinse. Step 2: apply Seal & Protect over Step 1, leave 10 minutes (heat optional), rinse thoroughly. Step 3: apply Acidic Closure to mid-lengths and ends, leave 5 minutes, rinse thoroughly and finish as desired. What not to do Professional use only, for all four products. Do not skip a step or run them out of order: Step 1 is designed to be sealed by Step 2, not rinsed out on its own. Do not rinse between Steps 1 and 2: they share a single joint rinse, after Step 2. For continued results between salon visits, pair with the S.P.R. Home Care range (shampoo, conditioner, mask), sold separately. What is in the kit S.P.R. Shampoo, 1000ml, Step 0, Preparation Phase Protein Infusion, 1000ml, Step 1, Reconstruction Phase Seal & Protect, 1000ml, Step 2, Reconstruction Phase Acidic Closure, 1000ml, Step 3, Closure Phase, pH 3.5

What it does Moisture Infusion is Step 2, the Core of the Protocol, of the Hydraluxe hydration protocol. Its Silky Beetonic System combines sugar beet derived amino acids with a cationic conditioning matrix to deliver deep, weightless hydration through the cortex, cuticle and surface, improving softness and manageability without weighing the hair down. Key actives, as on the label Betainesugar beet derived amino acid, osmolyte Trehalosehumectant Behentrimonium Methosulfate and Dicetyldimonium Chloridecationic conditioning matrix Cocos Nucifera (Coconut) OilPersea Gratissima (Avocado) Oil, Elaeis Guineensis (Palm) Oil, lipid-rich base Tocopheryl AcetateVitamin E When to use it As Step 2 of the full Hydraluxe protocol, immediately after Hydraluxe Shampoo and before the Balm (Step 3), on lengths and ends that feel dry, coated or unable to hold moisture between visits. How to use it Apply evenly to damp lengths and ends, off the scalp. Leave for 10 to 15 minutes. A gentle heat source may be used if the protocol calls for it. Rinse thoroughly. Proceed to Step 3, Hydraluxe Balm. What not to do Professional use only. Apply to lengths and ends only, off the scalp. Do not use in place of Prime D-Tox when the hair carries heavy mineral build-up: that imbalance needs Step 0 first.

What it does Hydraluxe Shampoo is Step 1, the Cleansing Phase, of the Hydraluxe hydration protocol. Powered by sugar beet derived amino acids, its AminoShield Cleanse helps cleanse without stripping the fibre, retaining moisture and preserving the hair's natural softness and shine while preparing it for Step 2. Key actives, as on the label Betainesugar beet derived amino acid, osmolyte Trehalosehumectant Acacia Senegal (Gum Arabic) Extractfilm-forming biopolymer Sodium PCAhumectant Contains Sodium Laureth Sulfate: this is not a sulphate free formula. When to use it As Step 1 of the full Hydraluxe protocol, immediately after Prime D-Tox and before Moisture Infusion (Step 2), on hair that reads dry, porous or dull and needs hydration. How to use it Apply to wet hair and scalp. Massage gently for 3 to 5 minutes. Rinse thoroughly. Proceed to Step 2, Moisture Infusion. What not to do Professional use only. Do not treat as a general clarifying shampoo outside the routine: its role is preparing the fibre for the hydration steps that follow. Avoid contact with eyes; rinse with water if it happens. Discontinue and consult a dermatologist if an allergic reaction occurs.

What is in the kit Prime D-Tox (500ml) Hydraluxe Shampoo (1000ml) Hydraluxe Moisture Infusion (1000ml) Hydraluxe Balm (300g) The protocol, in order Prime D-Tox. A chelating pre-treatment that lifts metal ions and hard water residue. Shampoo. Cleanses without stripping moisture, on wet hair and scalp. Moisture Infusion. The core hydration step, on damp lengths and ends, then rinsed. Balm. Leave-in seal with heat and UV protection. The only step never rinsed out. What not to do Professional use only: this kit does not go home with the client. Follow the temperature limit printed on each label.

What it does Acidic Closure is Step 3, the Closure Phase, of the S.P.R. protocol, and the final step of the four-step service. Its Fruit Acid Closure complex, at pH 3.5, the only pH declared on a Piur London label, uses natural fruit acids to help rebalance the fibre and seal the cuticle, preserving the results of the earlier steps and leaving hair aligned, light and luminous with a mirror-shine finish. How to use it Apply evenly to wet mid-lengths and ends. Massage in and leave on for 5 minutes. Rinse thoroughly and finish as desired. When to use it Step 3, the last step of the S.P.R. protocol, straight after the Seal & Protect rinse. Key actives, as on the label Vinegar and Glycolic Acid Lactic Acid and Gluconic Acid Tamarindus Indica Fruit Extract Citrus Limon (Lemon) Fruit Extract Pyrus Malus (Apple) Fruit Extract What not to do Professional use only. Do not apply over residue from the earlier steps: rinse Seal & Protect out completely first. Not designed as a stand-alone toner or finishing rinse outside the protocol.

What it does Seal & Protect is Step 2, the second Reconstruction Phase step, of the S.P.R. protocol. Its Abyssinian Peptide Lock combines Abyssinian oil and lipids to smooth the cuticle, lock in the botanical peptides deposited in Step 1 and help preserve resistance, flexibility and softness. How to use it Apply evenly over Step 1, from mid-lengths to ends. Massage in and leave on for 10 minutes; heat is optional. Rinse thoroughly. Proceed to Step 3, Acidic Closure. When to use it Step 2, applied over Step 1 (Protein Infusion), never in its place, before the joint rinse and Step 3, Acidic Closure. Key actives, as on the label Crambe Abyssinica Seed Oil (Abyssinian Oil) Hydrolyzed Rice Bran Protein Hydrolyzed Soy Protein Kappaphycus Alvarezii Extract and Laminaria Saccharina Extractmarine algae Bis-Cetearyl Amodimethiconeconditioning What not to do Professional use only. Never apply in place of Step 1: it locks the peptides in, it does not replace them. Do not move on to Step 3 without rinsing this step out thoroughly.

What it does Protein Infusion is Step 1, the first Reconstruction Phase step, of the S.P.R. protocol. Its Marine Bio-Peptide System combines lightweight botanical peptides with marine minerals to help reinforce weakened areas inside the fibre, improving elasticity and resistance without weighing hair down. How to use it Apply evenly to wet mid-lengths and ends. Do not apply to the scalp. Leave on for 10 minutes; a mild heat source may be used during the pause if the protocol calls for it. Do not rinse. Proceed straight to Step 2, Seal & Protect, applied over the top. When to use it Step 1, straight after S.P.R. Shampoo on towel-dried hair, before Seal & Protect (Step 2). Not designed to be used on its own. Key actives, as on the label Hydrolysed Keratin Hydrolysed Rice Bran Protein Hydrolysed Soy Protein Laurdimonium Hydroxypropyl Hydrolyzed Keratin Kappaphycus Alvarezii Extract and Laminaria Saccharina Extractmarine algae Free amino acid complex: GlycineArginine, Aspartic Acid, Alanine, Serine, Valine, Isoleucine, Proline, Threonine, Histidine, Phenylalanine. What not to do Professional use only. Do not rinse before Step 2: without Seal & Protect locking it in, the peptide layer rinses straight back out. Do not apply to the scalp. Not a stand-alone treatment: it is designed to work only as part of the full 4-step protocol.

What it does S.P.R. Shampoo is Step 0, the Preparation Phase, of the S.P.R. (Sensorial Porosity Reconstruction) protocol. Its Botanic Purifying Complex, built on plant-derived biopolymers, helps remove impurities and product build-up without stripping the fibre, preserving its integrity and preparing it to receive the botanical peptides in Step 1. How to use it Apply to wet hair and scalp. Massage gently for 2 to 3 minutes. Rinse thoroughly. Proceed straight to Step 1, Protein Infusion. What not to do Professional use only. Do not skip Step 0 before Step 1: the fibre needs to be clean and even for the peptides to land uniformly. Avoid contact with eyes; rinse with water if it happens. Discontinue and consult a dermatologist if an allergic reaction occurs.