Professional (217)

* Professional products. Requires special training! Honma Tokyo H-Brush Platinum Kit 2x150ml is the salon try-out size of the H-Brush Platinum protocol — a 2-step intensive reconstructive service from the Honma Tokyo H-Brush B.Tox line, built for hair rejuvenation rather than smoothing or straightening. The kit pairs Step 1 H-Brush Prepare Shampoo with Step 2 H-Brush Platinum Intensive Reconstructive Mask, both at 150ml, for a single-client service or a back-bar try-out before committing to the full 2x1000ml size. Formaldehyde-free, formalin-free, made in Brazil. At a glance Contents: 1 x Step 1 H-Brush Prepare Shampoo 150ml + 1 x Step 2 H-Brush Platinum Intensive Reconstructive Mask 150ml Total volume: 300 ml (2 x 150 ml) Format: professional 2-step salon protocol, try-out size Line: Honma Tokyo H-Brush B.Tox, Platinum variant Featured ingredients: Step 1 with green tea (Camellia Sinensis) leaf extract; Step 2 with keratin, panthenol, glycerin, sodium PCA, and cool-toning pigments (CI 51319 + CI 42090) Hair types: for all hair types; cool-toning support relevant for blonde, lightened, gray, or cool-tone hair Service profile: hair rejuvenation, intensive reconstruction, fortification — not a smoothing or straightening service Channel: strictly professional, salon-only Compliance: formaldehyde-free, formalin-free; patch test required 48 hours before service Origin: made in Brazil; EU Responsible Person Honma Comex Europe, Amsterdam, Netherlands What it is This is the salon 2-step H-Brush Platinum protocol in the smaller 150ml-per-step format. Step 1 is the H-Brush Prepare Shampoo, the universal prep cleanser that opens the cuticle and removes residue so the active formula can do its work. Step 2 is the H-Brush Platinum Intensive Reconstructive Mask, a richer cream formulation built around keratin, panthenol, and conditioning emollients, with a tonal cool-toning component for clients with blonde, lightened, or cool-tone hair. Together, the two steps form a hair-rejuvenation service from the Honma Tokyo H-Brush B.Tox line — designed to fortify, intensively recondition, and add tonal support, without changing the natural texture of the hair. What is in the kit Step 1 H-Brush Prepare Shampoo 150ml: the clarifying preparation. A balanced cleansing base with green tea leaf extract, glycerin, and conditioning agents that open the cuticle and remove buildup before the active step. Step 2 H-Brush Platinum Intensive Reconstructive Mask 150ml: the active reconstructive cream. Built around keratin, panthenol, sodium PCA, and glycerin in a rich emollient base, with cool-toning pigments (CI 51319 violet and CI 42090 blue) for clients whose hair benefits from tonal support against warmth and yellowing. Key ingredients Camellia Sinensis (green tea) leaf extract in Step 1 — an antioxidant botanical that supports the gentle clarifying base. Keratin in Step 2 — the protein around which the H-Brush B.Tox line is built, supporting hair fortification. Panthenol (pro-vitamin B5) in Step 2 — a recognized conditioning agent. Sodium PCA + glycerin in Step 2 — humectants that help draw moisture into the hair fiber. CI 51319 + CI 42090 in Step 2 — cool-toning pigments that provide tonal support for clients with blonde, lightened, gray, or cool-tone hair. Who it is for Salon professionals looking to try the H-Brush Platinum protocol on a single client before committing to the full 2x1000ml size. Stylists offering hair-rejuvenation services as part of an intensive reconstructive menu — particularly for clients whose hair needs fortification rather than smoothing. Clients with blonde, lightened, gray, or cool-tone hair who benefit from tonal cool-toning support alongside the reconstructive step. All hair types per the line's positioning; the protocol does not change natural texture and works across straight, wavy, and curly hair. Who it is not for Pregnant or lactating clients. The H-Brush B.Tox line is not recommended during pregnancy or while nursing. Children under 12 years old. The line carries a minimum-age guideline of 12 years. Clients with irritated or injured scalp. Do not apply over compromised skin. Clients seeking a smoothing or straightening service. This is a hair-rejuvenation protocol, not a smoothing system. For smoothing services, the Honma Tokyo Coffee Premium or Coffee Green lines are the appropriate choice. Clients with patch-test reactivity to any of the components. A 48-hour patch test behind the ear is mandatory before service. How to use Patch test 48 hours before service. Apply a small amount of Step 2 behind the ear and observe for itching or redness. Wash with Step 1. On wet hair, apply a small amount of H-Brush Prepare Shampoo, sufficient to cover the hair from roots to ends. Rinse off well without leaving residue. Repeat if necessary. Towel-dry. Remove excess water with a towel. Apply Step 2 lock by lock. Wear protective gloves. Apply the H-Brush Platinum Intensive Reconstructive Mask along the entire length of the hair, keeping 1 cm away from the roots. Comb through to ensure even distribution. Leave on for 20 minutes. Rinse off well with warm water until the product has been completely removed. Towel-dry and finish as desired. Optional thermal sealing with a flat iron at the appropriate temperature for the client's hair type may be applied per professional discretion. Safety: For external salon use only. Wear protective gloves. Do not apply on irritated or injured scalp. Do not use on eyelashes or eyebrows. Keep out of the reach of children. Do not ingest. In case of accidental contact with the eyes, rinse abundantly with water. The Step 2 formula contains parfum, benzyl benzoate, hexyl cinnamal, linalool, limonene, benzyl salicylate, coumarin, citral, and citronellol as fragrance components above EU disclosure threshold. The 48-hour patch test behind the ear is mandatory before every service. See the back of each component for the complete ingredient and allergen list. How long results last Per the H-Brush B.Tox line guidance, results last up to 2 months, with a cumulative effect across repeated applications. Result longevity in any given case depends on the client's hair condition, home-care routine, frequency of subsequent chemical services, and water and styling exposure. Stylists typically position re-application at the 6 to 8 week mark depending on client hair condition. Compatibility with prior services The H-Brush Platinum protocol is positioned for clients across hair types and tonal preferences. For clients who recently colored or bleached their hair, the coloring or bleaching service should be performed before the H-Brush Platinum service, not after. For clients with guanidine or ammonia thioglycolate relaxers in their hair history, a wait period of 7 to 15 days is the standard professional protocol. A strand test and the 48-hour patch test are mandatory before every service. When in doubt, defer to a stylist consultation and a strand test on a discreet section. Professional recommendation For salons offering Honma Tokyo services: this 2x150ml kit is the right size for try-out, single-client testing, or apprentice-stocking before committing to the full Honma Tokyo H-Brush Platinum Kit 2x1000ml. Once you have validated the protocol on a client and want to scale to regular service rotation, the 1000ml-per-step kit is the back-bar size. For salons offering a broader Honma Tokyo menu, see the full Honma Tokyo brand page for adjacent lines, including the Coffee Premium, Coffee Green, and Plasthair Bixyorellan systems. In short The H-Brush Platinum 2-step rejuvenation protocol in the salon try-out size: 150ml of Step 1 prep shampoo plus 150ml of Step 2 intensive reconstructive mask, with cool-toning support for blonde and lightened hair. For hair fortification, not smoothing: the H-Brush B.Tox line does not change natural texture; it intensively reconditions, fortifies, and adds tonal support. Ready to scale up? The Honma Tokyo H-Brush Platinum Kit 2x1000ml is the back-bar size for regular service rotation, with components also available individually.

What it does S.P.R. Full Protocol bundles the four steps of the S.P.R. (Sensorial Porosity Reconstruction) service into a single kit: S.P.R. Shampoo (Step 0), Protein Infusion (Step 1), Seal & Protect (Step 2) and Acidic Closure (Step 3). Together they clean, infuse botanical peptides into the cortex, lock the peptides in place and close the cuticle at pH 3.5, in one appointment of roughly 30 minutes' chair time. How to use it Step 0: apply S.P.R. Shampoo to wet hair and scalp, massage 2 to 3 minutes, rinse. Step 1: apply Protein Infusion to mid-lengths and ends, leave 10 minutes (heat optional), do not rinse. Step 2: apply Seal & Protect over Step 1, leave 10 minutes (heat optional), rinse thoroughly. Step 3: apply Acidic Closure to mid-lengths and ends, leave 5 minutes, rinse thoroughly and finish as desired. What not to do Professional use only, for all four products. Do not skip a step or run them out of order: Step 1 is designed to be sealed by Step 2, not rinsed out on its own. Do not rinse between Steps 1 and 2: they share a single joint rinse, after Step 2. For continued results between salon visits, pair with the S.P.R. Home Care range (shampoo, conditioner, mask), sold separately. What is in the kit S.P.R. Shampoo, 1000ml, Step 0, Preparation Phase Protein Infusion, 1000ml, Step 1, Reconstruction Phase Seal & Protect, 1000ml, Step 2, Reconstruction Phase Acidic Closure, 1000ml, Step 3, Closure Phase, pH 3.5

What it does S.P.R. Shampoo is Step 0, the Preparation Phase, of the S.P.R. (Sensorial Porosity Reconstruction) protocol. Its Botanic Purifying Complex, built on plant-derived biopolymers, helps remove impurities and product build-up without stripping the fibre, preserving its integrity and preparing it to receive the botanical peptides in Step 1. How to use it Apply to wet hair and scalp. Massage gently for 2 to 3 minutes. Rinse thoroughly. Proceed straight to Step 1, Protein Infusion. What not to do Professional use only. Do not skip Step 0 before Step 1: the fibre needs to be clean and even for the peptides to land uniformly. Avoid contact with eyes; rinse with water if it happens. Discontinue and consult a dermatologist if an allergic reaction occurs.

What it does Protein Infusion is Step 1, the first Reconstruction Phase step, of the S.P.R. protocol. Its Marine Bio-Peptide System combines lightweight botanical peptides with marine minerals to help reinforce weakened areas inside the fibre, improving elasticity and resistance without weighing hair down. How to use it Apply evenly to wet mid-lengths and ends. Do not apply to the scalp. Leave on for 10 minutes; a mild heat source may be used during the pause if the protocol calls for it. Do not rinse. Proceed straight to Step 2, Seal & Protect, applied over the top. When to use it Step 1, straight after S.P.R. Shampoo on towel-dried hair, before Seal & Protect (Step 2). Not designed to be used on its own. Key actives, as on the label Hydrolysed Keratin Hydrolysed Rice Bran Protein Hydrolysed Soy Protein Laurdimonium Hydroxypropyl Hydrolyzed Keratin Kappaphycus Alvarezii Extract and Laminaria Saccharina Extractmarine algae Free amino acid complex: GlycineArginine, Aspartic Acid, Alanine, Serine, Valine, Isoleucine, Proline, Threonine, Histidine, Phenylalanine. What not to do Professional use only. Do not rinse before Step 2: without Seal & Protect locking it in, the peptide layer rinses straight back out. Do not apply to the scalp. Not a stand-alone treatment: it is designed to work only as part of the full 4-step protocol.

What it does Seal & Protect is Step 2, the second Reconstruction Phase step, of the S.P.R. protocol. Its Abyssinian Peptide Lock combines Abyssinian oil and lipids to smooth the cuticle, lock in the botanical peptides deposited in Step 1 and help preserve resistance, flexibility and softness. How to use it Apply evenly over Step 1, from mid-lengths to ends. Massage in and leave on for 10 minutes; heat is optional. Rinse thoroughly. Proceed to Step 3, Acidic Closure. When to use it Step 2, applied over Step 1 (Protein Infusion), never in its place, before the joint rinse and Step 3, Acidic Closure. Key actives, as on the label Crambe Abyssinica Seed Oil (Abyssinian Oil) Hydrolyzed Rice Bran Protein Hydrolyzed Soy Protein Kappaphycus Alvarezii Extract and Laminaria Saccharina Extractmarine algae Bis-Cetearyl Amodimethiconeconditioning What not to do Professional use only. Never apply in place of Step 1: it locks the peptides in, it does not replace them. Do not move on to Step 3 without rinsing this step out thoroughly.

What it does Acidic Closure is Step 3, the Closure Phase, of the S.P.R. protocol, and the final step of the four-step service. Its Fruit Acid Closure complex, at pH 3.5, the only pH declared on a Piur London label, uses natural fruit acids to help rebalance the fibre and seal the cuticle, preserving the results of the earlier steps and leaving hair aligned, light and luminous with a mirror-shine finish. How to use it Apply evenly to wet mid-lengths and ends. Massage in and leave on for 5 minutes. Rinse thoroughly and finish as desired. When to use it Step 3, the last step of the S.P.R. protocol, straight after the Seal & Protect rinse. Key actives, as on the label Vinegar and Glycolic Acid Lactic Acid and Gluconic Acid Tamarindus Indica Fruit Extract Citrus Limon (Lemon) Fruit Extract Pyrus Malus (Apple) Fruit Extract What not to do Professional use only. Do not apply over residue from the earlier steps: rinse Seal & Protect out completely first. Not designed as a stand-alone toner or finishing rinse outside the protocol.

What it does The Ampola PowerDose S.P.R. is a single-dose treatment from the S.P.R. Home Care range. Its own label reads "S.P.R. (Sensorial Porosity Reconstruction)" and "Reconstruction in its ultimate strength", with a side band naming its own technology, "Maximum Reconstruction, Peptide Charge P4", distinct from the AcerolaForce technology named on the Shampoo, Conditioner and Mask Home Care labels of the same range. Key actives The front label confirms the product name and the Peptide Charge P4 technology name, but no ingredients panel is visible in the product photography reviewed for this file, and no back label or commercial sell sheet entry was found for this SKU. This file does not list specific actives for the ampoule; see divergencias for what is and is not confirmed. When to use it Once a week, on a wash day, for anyone following the S.P.R. Home Care routine at home. How to use it Wash with S.P.R. Shampoo Home Care and rinse. Apply the full ampoule to clean, damp lengths and ends. Leave for 3 minutes and rinse. Do not follow with conditioner or mask: the ampoule stands in for both on the day it is used. What not to do Do not use more than one ampoule per wash. Do not apply to dry or unwashed hair. Do not follow it with conditioner or mask on the day it is used.

What it does Hydraluxe Shampoo is Step 1, the Cleansing Phase, of the Hydraluxe hydration protocol. Powered by sugar beet derived amino acids, its AminoShield Cleanse helps cleanse without stripping the fibre, retaining moisture and preserving the hair's natural softness and shine while preparing it for Step 2. Key actives, as on the label Betainesugar beet derived amino acid, osmolyte Trehalosehumectant Acacia Senegal (Gum Arabic) Extractfilm-forming biopolymer Sodium PCAhumectant Contains Sodium Laureth Sulfate: this is not a sulphate free formula. When to use it As Step 1 of the full Hydraluxe protocol, immediately after Prime D-Tox and before Moisture Infusion (Step 2), on hair that reads dry, porous or dull and needs hydration. How to use it Apply to wet hair and scalp. Massage gently for 3 to 5 minutes. Rinse thoroughly. Proceed to Step 2, Moisture Infusion. What not to do Professional use only. Do not treat as a general clarifying shampoo outside the routine: its role is preparing the fibre for the hydration steps that follow. Avoid contact with eyes; rinse with water if it happens. Discontinue and consult a dermatologist if an allergic reaction occurs.

What it does Moisture Infusion is Step 2, the Core of the Protocol, of the Hydraluxe hydration protocol. Its Silky Beetonic System combines sugar beet derived amino acids with a cationic conditioning matrix to deliver deep, weightless hydration through the cortex, cuticle and surface, improving softness and manageability without weighing the hair down. Key actives, as on the label Betainesugar beet derived amino acid, osmolyte Trehalosehumectant Behentrimonium Methosulfate and Dicetyldimonium Chloridecationic conditioning matrix Cocos Nucifera (Coconut) OilPersea Gratissima (Avocado) Oil, Elaeis Guineensis (Palm) Oil, lipid-rich base Tocopheryl AcetateVitamin E When to use it As Step 2 of the full Hydraluxe protocol, immediately after Hydraluxe Shampoo and before the Balm (Step 3), on lengths and ends that feel dry, coated or unable to hold moisture between visits. How to use it Apply evenly to damp lengths and ends, off the scalp. Leave for 10 to 15 minutes. A gentle heat source may be used if the protocol calls for it. Rinse thoroughly. Proceed to Step 3, Hydraluxe Balm. What not to do Professional use only. Apply to lengths and ends only, off the scalp. Do not use in place of Prime D-Tox when the hair carries heavy mineral build-up: that imbalance needs Step 0 first.

What it does Prime D-Tox Hydraluxe is Step 0, the Purify Phase, of the Hydraluxe hydration protocol. Its BioChelate Reset System, a botanical pre-treatment with ginger and marine algae, helps remove metal ions, mineral build-up and impurities while preserving the hair's natural lipid barrier, balancing porosity before the hydration steps that follow. Key actives, as on the label Kappaphycus Alvarezii Extractmarine algae Fucus Vesiculosus (Bladderwrack) Extractmarine algae Zingiber Officinale (Ginger) Root Extract Sodium Gluconatechelating agent When to use it As the opening step of the full Hydraluxe protocol, immediately before Hydraluxe Shampoo (Step 1), on hair with visible build-up or hard water residue. It also works as a standalone pre-treatment before a colour, lightening or other chemical service, particularly in a hard water area. How to use it Apply evenly to damp hair. Leave for 5 to 10 minutes. Rinse thoroughly. Proceed to Step 1, Hydraluxe Shampoo, or continue with the planned service. What not to do Professional use only. Rinse thoroughly before the next step: build-up left behind changes how the rest of the protocol performs.

What it does Hydraluxe Balm is Step 3, the Sealing Phase, of the Hydraluxe hydration protocol. Its GlossFrame Shield System is a lightweight leave-in balm that smooths the cuticle, seals in the hydration of Steps 0 to 2, and helps protect against heat, UV exposure and humidity, leaving hair sleek, soft and luminous. Key actives, as on the label Betainesugar beet derived amino acid, osmolyte Trehalosehumectant Ethylhexyl MethoxycinnamateUV filter Simmondsia Chinensis (Jojoba) Seed OilPrunus Amygdalus Dulcis (Sweet Almond) Oil, Helianthus Annuus (Sunflower) Seed Oil, lipid film Hydrolyzed Rice Protein When to use it As the final step of the full Hydraluxe protocol, after the joint rinse of Steps 0 to 2, or on its own as a leave-in for lengths and ends that need frizz control, shine and heat or UV protection before styling. How to use it Apply evenly to damp or dry hair, concentrating on lengths and ends. Do not rinse. Finish as desired. What not to do Professional use only. Do not apply to the scalp; lengths and ends only. Apply a light amount: this step is never rinsed out, and a heavy hand is what turns the hydration underneath it into weight.

What it does The Ampola PowerDose Gold Ritual is a single-dose treatment from the Gold Ritual Home Care range. Its own label reads "GOLD RITUAL" and "Nourishment in its finest ritual", with a side band naming its own technology, "Lipid PowerDose", distinct from the LipidHoney technology named on the Shampoo, Conditioner and Mask labels of the same range. Key actives The front label confirms the product name and the Lipid PowerDose technology name, but no ingredients panel is visible in the product photography reviewed for this file, and no back label or commercial sell sheet entry was found for this SKU. This file does not list specific actives for the ampoule; see divergencias for what is and is not confirmed. When to use it Once a week, on a wash day, for anyone following the Gold Ritual Home Care routine at home. How to use it Wash with Gold Ritual Shampoo and rinse. Apply the full ampoule to clean, damp lengths and ends. Leave for 3 minutes and rinse. Do not follow with conditioner or mask: the ampoule stands in for both on the day it is used. What not to do Do not use more than one ampoule per wash. Do not apply to dry or unwashed hair. Do not follow it with conditioner or mask on the day it is used.

What it does Stabilizer is a standalone technical safety product in the Sensorial Repair line, not a step of a fixed protocol: it stabilises and protects the hair fibre during alkaline chemical processes. It runs on the 5-Moment Protection System, built around three named technologies on the label: Seaplex® for botanical peptide molecular repair, Filcortex® to reinforce the internal structure, and Osmotic Shield® to protect the fibre during chemical stress. Key actives, as on the label Seaplex®botanical peptide molecular repair Filcortex®reinforces internal structure Osmotic Shield®protects during chemical stress Glycerin and Trehalosehumectants Crambe Abyssinica Seed Oil (Abyssinian Oil) Hydrolyzed Rice Bran Protein and Hydrolyzed Soy Protein Kappaphycus Alvarezii Extract and Laminaria Saccharina Extractmarine algae When to use it Before, during and after bleaching, colouring or straightening services, on any section going through alkaline chemistry. How to use it Spray 2 to 3 times through mid-lengths and ends, section by section. Gently massage to distribute. What not to do Professional use only: this product does not go home with the client. Apply to mid-lengths and ends only; keep it off the scalp. Avoid contact with eyes and skin; rinse with water if it happens. Ensure adequate ventilation when using it. Discontinue and consult a dermatologist if an allergic reaction occurs.

What is in the kit Prime D-Tox (500ml) Hydraluxe Shampoo (1000ml) Hydraluxe Moisture Infusion (1000ml) Hydraluxe Balm (300g) The protocol, in order Prime D-Tox. A chelating pre-treatment that lifts metal ions and hard water residue. Shampoo. Cleanses without stripping moisture, on wet hair and scalp. Moisture Infusion. The core hydration step, on damp lengths and ends, then rinsed. Balm. Leave-in seal with heat and UV protection. The only step never rinsed out. What not to do Professional use only: this kit does not go home with the client. Follow the temperature limit printed on each label.

What is in the set Ampola PowerDose Hydraluxe (15ml), hydration Ampola PowerDose Gold Ritual (15ml), nutrition Ampola PowerDose S.P.R. (15ml), reconstruction Why three different treatments A hair schedule rotates three jobs instead of giving the hair the same thing every week: moisture, lipids, and structure. Each ampoule does one of them, and each replaces both conditioner and mask on the day it is used. Nine weeks, three ampoules Each 15ml ampoule covers three treatment days when applied to mid-lengths and ends: roughly a third each time. Three ampoules, nine wash weeks, in rotation. On very long or very thick hair you will use more per application and the set will cover fewer weeks. How to use it Wash with the shampoo of your range and rinse. Apply about a third of the ampoule to clean, damp lengths and ends. Leave for 3 minutes and rinse. Do not follow with conditioner or mask: the ampoule stands in for both that day. Next wash week, move to the next ampoule in the rotation. Keep the open ampoule closed and dry between uses. What it does not include The washes between treatment days. Add the shampoo and conditioner of your range so the nine weeks run without a gap.

The LAVI BTX EXPERT Protein Smooth  line combines advanced biotechnology with luxurious natural oils to deliver superior hair realignment and deep restoration. Formulated with Argan, Coconut, Olive, and Macadamia oils, it replenishes essential nutrients, seals the cuticle, and restores vitality from root to tip. Ideal for all hair types, Protein Smooth reduces frizz, enhances manageability, and promotes an intense, mirror-like shine.With professional-grade performance, it ensures long-lasting smoothness, hydration, and resilience — leaving hair healthier, softer, and irresistibly smooth after every treatment. How to Use 1. Wash the hair thoroughly with a deep cleansing shampoo to remove impurities and open the cuticles. 2. Towel-dry to remove excess moisture, leaving the hair slightly damp. 3. Apply the LAVI BTX EXPERT treatment evenly from roots to ends, using a brush or comb to ensure full distribution. 4. Leave on for 15 to 20 minutes, depending on the hair type and the desired level of smoothness or treatment intensity. 5. Rinse thoroughly with water to remove the product. 6. Finish as desired — you may blow-dry and flat iron for a smoother, longer-lasting result, or style naturally for a softer finish.