All Products (11)

A restructuring and toning hair mask specifically formulated for blonde, highlighted, grey, or light-coloured hair. Helps restore, hydrate, and strengthen damaged or porous strands by integrating into the hair fibre, “gluing” disulfide bonds, and boosting elasticity and resilience  Contains violet/purple pigment to neutralize brassy or yellow tones, restoring bright, radiant blonde shine . Preparation Wash hair thoroughly with a clarifying or anti-residue shampoo. Towel-dry until hair is about 80% dry (still damp)  Application3. Divide hair into several sections (e.g. 6 parts recommended).4. Apply the mask to each section using a brush, keeping ~1 cm away from the scalp.5. Comb through each section to distribute product evenly and align hair fibres  Processing6. Let it sit for 10–20 minutes (some sources say up to 20 min max) Finish7. Rinse lightly, leaving some product in – don’t fully wash it out 8. Blow-dry hair completely, then flat‑iron each strand about 7–10 times to seal in the treatment

The G.Hair Japanese Treatment Kit is a two-step smoothing system designed for voluminous, frizzy, or unmanageable hair. It includes: Deep‑cleansing/pre‑treatment shampoo Japanese Treatment smoothing cream Formulated with a cocktail of amino acids, natural proteins, and extracts of goji berries and blueberries, this kit aims to smooth, hydrate, reduce volume, and impart shine and manageability, without fully straightening hair How to Use: Step-by-Step 1. Shampoo Apply the clarifying shampoo to damp hair, massage gently, then rinse thoroughly. Repeat if needed  2. Treatment Application After shampooing, apply the Japanese Treatment cream evenly throughout the hair. Leave in place for about 30 minutes, to allow active ingredients time to work 3. Rinse & Style Rinse out the treatment thoroughly. Finish styling as desired. For enhanced smoothness, blow‑dry and flat iron hair after treatment application  There’s no flat‑ironing specified in all instructions, but many stylists recommend heat styling post‑treatment to seal effects and boost shine

Key ingredients: keratin, white clay, cocoa oil — which deeply condition, repair, and reduce frizz while adding shine and manageability  It’s formulated to eliminate up to ~95% of frizz and curl, for a sleeker, radiant finish, and is professional-use focused How to Use  Step 1: Deep Cleansing Shampoo Shampoo twice, massaging into wet hair and scalp for a few minutes each time. Let sit 2–3 minutes, then rinse thoroughly after each wash. Towel-dry, then blow-dry: 80% dry if hair is moderately curly. 100% dry if hair is very curly  Step 2: Keratin Treatment Section fully dried hair into 4 parts. Apply the treatment (small amount per thin subsection), from ~1 cm away from scalp down to the ends, starting at the nape of the neck. Let sit for ~20 minutes  Blow-dry completely, aligning strands. Flat-iron each thin section 7–10 times to seal the keratin into the hair.

The G.Hair Moroccan Deep Cleansing Shampoo is a professional-grade clarifying shampoo designed to remove product build-up, oils, and impurities from the scalp and hair in preparation for the smoothing treatment. It is part of the two-step G.Hair Moroccan Capillary Smoothing Keratin Treatment Kit, which also includes the smoothing treatment itself. This system is formulated with keratin, white clay, and cocoa oil for deep cleansing and preparing hair to receive treatment and smoothing ingredients. This shampoo is suitable for all hair types and is especially useful for dry, wavy, frizzy, or chemically treated hair, enhancing shine, manageability, and nutrient absorption.

A professional keratin smoothing treatment designed to eliminate up to 95% of frizz and curls, enriched with White Clay and Cocoa Oil for deep conditioning, shine, and manageability Effective on both virgin and chemically treated hair, often delivering results lasting 3 to 5 months, depending on after-care routine How to Use (Professional Protocol) STEP 1: Deep Cleansing Shampoo Wet hair, apply clarifying shampoo, massage for a few minutes to remove buildup. Leave on for 2–3 minutes, then rinse thoroughly. Repeat the process to ensure full cleansing. Towel-dry, then blow-dry completely: 80% dry if hair is moderately curly 100% dry if hair is very curly  STEP 2: Moroccan Treatment Section hair into four parts. In thin subsections, apply the smoothing cream from roots to ends—keeping about ½ inch (1 cm) off the scalp. Begin at the nape of the neck. Let the product sit for ~20 minutes. Blow-dry the hair completely, using a paddle brush to align strands. Flat-iron each thin section, 7–10 passes per section to seal in the treatment.

The German One Premium Treatment is a smoothing system designed for high-frizz, coarse, or curly hair, providing intense smoothing effects that can last up to 5 months with proper aftercare. Step-by-Step Usage Guide Step 1: Deep-Cleansing Shampoo Apply the clarifying shampoo to wet hair and massage thoroughly, focusing on the scalp. Repeat 2–3 times as needed to remove buildup. Towel-dry and blow-dry: ~80% dry if hair is moderately curly 100% dry if hair is very curly Step 2: Keratin Smoothing Treatment Always wear gloves during application. Divide hair into 4 sections. On thin subsections, apply treatment from ~½ inch from the scalp down to ends. Let sit for ≈20 minutes. Blow-dry fully to 100%. Flat-iron thin sections, 7–10 passes each, at approximately 400 °F (~200 °C).

Key ingredients: keratin, white clay, cocoa oil — which deeply condition, repair, and reduce frizz while adding shine and manageability  It’s formulated to eliminate up to ~95% of frizz and curl, for a sleeker, radiant finish, and is professional-use focused How to Use  Step 1: Deep Cleansing Shampoo Shampoo twice, massaging into wet hair and scalp for a few minutes each time. Let sit 2–3 minutes, then rinse thoroughly after each wash. Towel-dry, then blow-dry: 80% dry if hair is moderately curly. 100% dry if hair is very curly  Step 2: Keratin Treatment Section fully dried hair into 4 parts. Apply the treatment (small amount per thin subsection), from ~1 cm away from scalp down to the ends, starting at the nape of the neck. Let sit for ~20 minutes  Blow-dry completely, aligning strands. Flat-iron each thin section 7–10 times to seal the keratin into the hair.  

White clay and cocoa oil: deeply condition, repair damaged strands, and control frizz  Clinically shown to eliminate up to 95% of frizz and curls, suitable for all hair types without altering hair colour Long-lasting effect — smoothness can persist for 3–5 months or up to 5 months depending on hair care post-treatment. Step-by-Step Usage Instructions Step 1: Deep Cleansing Shampoo Wash hair 2 to 3 times with the included deep-cleansing shampoo, massaging at the scalp to remove buildup. Allow 2–3 minutes per wash before rinsing Towel-dry hair, then blow-dry to 80% dry for moderate curls, or 100% dry if hair is very curly Step 2: Keratin Smoothing Treatment Section hair into four parts. On thin subsections, apply the Moroccan treatment from root to ends, keeping about ½ inch (~1 cm) from the scalp to avoid irritation  Let it process for about 20 minutes  Step 3: Heat Activation Blow-dry hair fully, using a paddle or round brush to align strands  Working in very thin slices, flat-iron each section 7–10 times to seal in the treatment  Allow hair to cool for 10–15 minutes before moving on . Step 4: Final Rinse & Style Rinse hair with lukewarm water only—do not shampoo post-treatment  Style as desired. Avoid washing for 48 hours to let results set if recommended by some stylists

The B-TOX ORGANIC BLOND helps to standardize the color of blonde hair while treating the hair fiber, providing intense nutrition and reconstruction of fragile areas. The results include aligning the hair structure, reducing frizz, controlling excessive volume and enhancing shine.DIRECTIONS: Without washing your hair, apply the Botox tin starting at the roots, respecting 0.5 cm of scalp (never apply to the scalp), leave it to act for around 30 minutes to 1 hour and rinse off 80% of the product. If the application is carried out on blonde hair, remove 100% of the product. For root touch-ups, concentrate the product on the roots and leave it to act for 20 minutes and then another 10 minutes on the ends and rinse. Dry your hair with a hairdryer and straighten it strand by strand at least 10 times.CAUTIONS: Product for external use. If irritation occurs, stop using the product. Non-toxic product, store in a cool, ventilated place. Keep out of the reach of children.

G.Hair INTESE BTOX: A deep reconstruction hair mask, formulated to realign hair fibers, reduce volume, control frizz, and add shine and softness. Key active ingredients include palm oil (moisture-rich), keratin, and wheat protein, which nourish, strengthen, and rebuild the hair structure from root to tip Tua Saúde+15Beautyandwomanllc+15Beautyandwomanllc+15. Designed to prolong the effects of salon smoothing or volume-reduction treatments, and ideal for frizz-prone, unruly, or very voluminous hair. Step-by-step application: Wash your hair thoroughly with a cleansing shampoo to remove buildup—clarifying or sulfate-free is best. Towel-dry to remove excess water, leaving hair damp (not dripping)  Apply the mask evenly, from roots to ends, focusing on problem areas (high volume or damage zones). Then comb through to align the fibers. Processing time: Leave on for 20–40 minutes, depending on hair thickness and level of damage. Rinse thoroughly, removing approximately 50–70% of the product. Dry and style: Towel-dry partially, then either blow-dry with a brush or use a flat iron to seal the effect and smooth the strands further.

G.Hair Japanese Btox is a professional hair treatment mask developed in Brazil. It’s designed to deeply treat and smooth frizzy, porous, or damaged hair, reducing volume while increasing shine and softness. How to Use G.Hair Japanese Botox (Step-by-Step) Note: Always perform a strand test before applying to the whole head. 🔹 Step 1: Wash Wash hair 2x with a deep-cleansing shampoo (preferably sulfate-free). Rinse thoroughly and towel-dry hair until it's about 80% dry. 🔹 Step 2: Apply the Botox Divide the hair into 4 sections. Using a brush, apply the mask evenly section by section, from root to tip (do not apply directly on the scalp). Comb through to distribute the product and remove excess. 🔹 Step 3: Processing Time Leave it on for 20 to 40 minutes depending on hair texture: 20–25 min for fine, straight, or lightly damaged hair 30–40 min for thick, frizzy, or heavily damaged hair 🔹 Step 4: Rinse Rinse out 50–80% of the product with water only. The more you leave in, the stronger the smoothing effect. 🔹 Step 5: Blow-Dry and Flat Iron Blow-dry the hair 100% straight using a brush. Flat iron in thin sections at 180–230°C (356–446°F): 5–7 passes per strand (less for lightly damaged hair) Use fewer passes if you want to preserve some natural texture 🔹 Optional: Post-Rinse (after 24–48 hours) Some professionals recommend rinsing after 1–2 days and applying a moisturizing mask.