RP Pink Toner Mask- 1L

Observations: The hairdresser should have a prior discussion with the client, since it is important to eliminate possible doubts about the final result, for example the desired tone, if the hair is healthy and strong enough to resist bleaching. It is very important to carry out a strand test with the discoloration that will be used, the healthier and less chemical the hair has, the hairdresser will reach the tone more easily.

The KEY point for the champagne blonde result with its pink sparkles, is the discoloration, remember that it should NOT have excess gold. If there is excess gold in the hair, the toner will lose its effect and the desired effects will not be achieved.

There are 2 ways to use the Pink Robson Peluquero toner:

a) If the client arrives at the hairdresser with a lightening base between 9 – 10 without excess gold: Wash with a moisturizing shampoo, leave 20% moisture in the hair and then start the process (indications below) .

b) The hairdresser performs the bleaching process and manages to reach tone 9 – 10 without excess gold: Leave 20% moisture in the hair and then start the process (indications below).

– Separate the hair into four parts.
– Place the necessary amount of the pink toner in a bowl
– With the help of a brush, apply in thin strands
– Gently massage the strands aware that the product is absorbed into the hair
– You can let the product act between 5 to 45 minutes. The longer it is left, the whiter it will be.
– Rinse Pink RP Toner only with plenty of water
– End as you wish

Important: Do not place the product in your hand and rub it, as the white foam that comes off causes the toner to lose power and product is wasted.